The CFC-3000W comes standard with an automatic self cleaning function that can be set for cleaning every few seconds up to once every twenty four hours. It has been specifically designed to substantially reduce the turbidity in wine including removing must. This centrifuge can handle up to 1000 gallons per hour, depending on the percentage of must in the wine.

In some wines it may be required to further clarify the wine to obtain the necessary levels. This can be achieved by a cartridge housing after the centrifuge. Installing the centrifuge before a clarifying system will increase the productivity and also reduce the loading on the system. Letting the centrifuge do 99% of the work.

View more Automated Self-Cleaning Centrifuge Systems

Magnum CFC-2000 Centrifuges are high-quality units engineered for the super-efficient separation of solids from liquids. The rotating stainless steel bowl is dynamically balanced for extra smooth operation, encased by heavy machined cast bowl and lid including 4 point dampeners for vibration isolation. The Magnum CFC-2000 Centrifuge is able to separate granular solids from water, industrial cutting and grinding oils, synthetic coolants and many other industrial processes that has sand or mud type solids to deal with.A

Operation :
The Magnum CFC 2000 Centrifuge works with the use of centrifugal force, allowing separation of any solid particles from liquid. The centrifugal force has a maximum 3,000 gravities. The separation of solids is greatly improved when the liquid is exposed longer to the centrifugal force. This can be achieved by simply slowing the supply rate to the centrifuge. Extended retention time enables improved clarity and cleanliness in the end product. The liquid is fed through an inlet connection in the lid of the centrifuge, entering directly into the rotating bowl where the centrifugal force then throws the solids out of the liquid and to the side of the bowl. The solid content then becomes compacted as a sludge mixture, and the clean liquid then flows up the centre of the bowl and discharges by gravity through a 2″ outlet at the bottom of the Centrifuge. The solids left in the bowl can then be removed manually or ideally removed automatically by means of the self cleaning device.
Typical Flow Rates :
Waste Water 1000 GPH Flow rate given are an indication only and is subject to several factors such as viscosity of liquid, temperature of liquid, percentage of solids PPM (parts per million), particle size in microns and difference in specific gravity. The units are cost effective, many paying for themselves within a few months. Their superior design offers improved performance, a longer trouble free operating life, and provides low maintenance more so than any other centrifuge available on the market today. Fully Automated and Programmable.

View more Automated Self-Cleaning Centrifuge Systems

Magnum CFC-1000 Centrifuges are high-quality units engineered for the super-efficient separation of solids from liquids. The rotating stainless steel bowl is dynamically balanced for extra smooth operation, encased by a heavy machined cast bowl and lid including 4 point dampeners for vibration isolation. The Magnum Centrifuge is able to separate solids from water, industrial cutting and grinding oils, synthetic coolants, waste lube oils, some solvents, waste vegetable oil, and many other industrial processes. Also algae from the water.

Operation :

The Magnum CFC-1000 Centrifuge works with the use of centrifugal force, allowing the separation of any solid particles from liquid. The centrifugal force has a maximum 3,000 gravities. The separation of solids is greatly improved when the liquid is exposed longer to the centrifugal force. This can be achieved by simply slowing the supply rate to the centrifuge. Extended retention time enables improved clarity and cleanliness in the end product. The liquid is fed through an inlet connection in the lid of the centrifuge, entering directly into the rotating bowl, where the centrifugal force then throws the solids out of the liquid and to the side of the bowl. The solid content then becomes compacted as a sludge mixture, and the clean liquid then flows up the centre of the bowl and discharges by gravity through a 2″ outlet at the bottom of the Centrifuge. The solids left in the bowl can then be removed manually or ideally removed automatically by means of the self-cleaning device.

Typical CFC-100 Flow Rates :

Flow rate given are an indication only and is subject to several factors such as viscosity of liquid, temperature of liquid, percentage of solids PPM (parts per million), particle size in microns and difference in specific gravity. 

Machine and Grinding Coolant 1000 GPH 

Waste Water 1000 GPH

Gold and Silver Recovery 160 GPH

Waste Oils 80 to 400 GPH 

Any liquid solid separation job.

The units are cost-effective, many paying for themselves within a few months. Their superior design offers improved performance, a longer trouble-free operating life, and provides low maintenance, more so than any other centrifuge available on the market today.

Fully Automated, Self Cleaning, Compact Design, One Pass Separation, 4 Point Vibration Isolation Super Quiet Operation, No Wearable Parts

View more Automated Self-Cleaning Centrifuge Systems